In-Situ Machining
- In-Situ Flange Facing from 1” – 120”
Diameter
- Largest In-Situ Machine operators in the
Middle East
- Largest Flange Facing Machine in the Middle
East (48-120)
- 0 – 24” diameter external mounted
- Vast stock of FF machines
- RF/RTJ/Full Face/Grey-lock type sealing joints
all machine able.
- Weld overlay repairs can be re-machined
- All types of materials can be machined to
accurate tolerances
- Diverse range of Milling, Drilling, Boring & skimming In-situ
Machines
- Milling capacity up to 2m and combined with a picture frame
kit allows pump beds or mounts to be machined within critical
tolerances
- Drilling capacity 0.5” – 4”
- In line boring machining capacity up to 1.5m long and 10”
Diameter
- Ability to design and fabricate machines to suit the scope of
Work
On Site Machining, Taking The Machine Shop To The Work Site
Pretect operate and provide the largest capacity of specialist on site machining services in the Middle East
Our machining capacity allows for critical machining operations to be undertaken at site and reduce need for plant to be moved to conventional machine shops for repairs
Machining operations are carried out on-site with the same precision and accuracy of a machine shop but without the need to dismantle or remove equipment from its location
The uniqueness of the Onsite machines allows for installation of the equipment into tight access areas or where it is impossible to remove the work piece to a workshop for standard repairs
Offshore-onshore or subsea the Pretect Onsite machining services can be delivered to suit the client's needs where a standard machine shop cannot
Taking the workshop to the worksite through Pretect onsite machining services to undertake on site machining repairs is cost saving, efficient in reducing down time of critical plant as well as reducing risk when dismantling or loading equipment to undertake conventional workshop repairs
- Flange diameter machining capacity from .5”–120” internal mounted
- 0–24” diameter external mounted
- Exchanger seal facing and vessel oval man way machining
- RF/RTJ/Full Face/Grey-lock type sealing joints all machine able
- Weld overlay repairs can be re-machined
- All types of materials can be machined to accurate tolerances
- Drilling capacity .5”–4”
- Pipe cutting and prepping services up to 84”
- Milling capacity up to 4m and combined with a picture frame kit allows pump beds or mounts to be machined within critical tolerances
- In line boring machining capacity up to 6m long and 24” diameter
- Client bespoke machining solutions can be developed to suit client specific requirements
- Valve machining / refurbishment